The Lupo AX 120 combines the legendary performance of the Dalbello cabrio design with additional foot space and an even more comfortable fit.
The rating of this product is 0 out of 5
2023 Dalbello Lupo AX 120
The Lupo AX 120 is the crossover ski boot for freeriding and touring. With a 100 mm last it offers slightly more foot space and therefore particularly impressive comfort. Its vast area of use ranges from the piste in ski resorts to deep powder in the backcountry, only accessible after a climb. The large, easy-to-use ski/hike buckle and removable tongue allow a 67° range of movement. The legendary freeride performance of the cabrio design comes through on descents and enables beautifully carved turns even on hard pistes. The lightweight IF AIR liner becomes thermoformable after just a few minutes to enable optimal adaptation to the foot. High-quality GripWalk soles with a Vibram® profile can be optionally fitted to make walking easier and reduce the risk of slipping.
Cabrio Design, Countour 4, KINETIC RESPONSE TONGUE, Low Cuff Hinge Point, HYPERBAND WIDE PROFILE CUFF CLOSURE, TOURING NORM WITH TECH INSERT (PIN)
FP-100 MICRO BUCKLES
Level: Advanced - Expert
Sizes: 26.5 - 29.5
Last: 100 @ 26.5
Flex Index is how much effort or work is required to move the cuff of the ski boot forward while the lower shell is stationary; typically retained by the binding. This number can be anything from 50 or 60 to 130+ (or even 1 - 10). There is no standard for this number across the ski boot industry and the ‘Flex Index’ is not based on any metric like newton-meters, foot-pounds, or Pascals. Even within within any given manufacture’s line-up, a boot with a Flex Index of 110 might not be the same as another boot with the same rating. The main thing to remember is that the higher the number, the stiffer the boot. The Flex Index should only be used as just one general factor in choosing a ski boot.
Your style of skiing, experience, level of skiing, terrain, use, height, mass, and personal preference all play a role in helping you pick the stiffness of your boot. A World Cup racer or an advanced/expert skier that prefers making precision turns at high speeds requiring techniques using a lot of tip pressure might need a stiffer boot. On the other hand, someone who hits the slopes every weekend with her family or Patrols three days a week might prefer a more moderate flex.
‘Last’ is a metric that describes the width of your foot at its widest point, which is typically at the forefoot or the ball of your foot. This will be represented in millimeters: i.e: 102mm. This is a critical consideration, because going up a size in a boot will move the widest part of the boot forward while the widest part of your foot will be kept reward. As you can gather, going up a size is not an option.
*For a comprehensive explanation on ski boot fitment, please visit the link below: Ski Boot Fitting
Alpine Touring, A/T, or Randonnée
Our Touring boots will typically be made with lighter materials. They will also generally have a ‘Walk’ mode in the rear of the boot, allowing the cuff to release for a greater range and ease of motion. Our Touring boots will be compatible with bindings designed for Alpine Touring (A/T) and equipped with ‘Tech’ Inserts. Also, permitting the boots are equipped with Alpine or Grip Walk soles, they will be compatible with most contemporary Alpine DIN Bindings. Both A/T bindings and Alpine DIN bindings must be installed, adjusted, and function tested by a certified binding technician.
*If you’re unsure if your boots and bindings are compatible, please have a qualified technician give them a tactile and visual inspection. ?