2022 Roxa R/FIT 100

R/FIT 100

The R/Fit 100 is for sport performance level skiers who seek comfort and control in a boot that will comfortably accommodate a wide range of foot shapes. Featuring Roxa’s BioFit last technology and ultralight “Next Gen” design, the R/Fit 100 sets a new benchmark for the largest segment of the ski boot market. The R/Fit 100 comes equipped with Roxa’s proprietary U75 custom heat moldable liners that are lightweight, warm and precise.

PRODUCT DETAILS

Category: Sport Performance, All Mountain
Color: Black / Black / Lime
Last: 102-104 mm BioFit CM
Flex: 100
Sizes: MS 26.5 - 29.5

Flex Index

Flex Index is how much effort or work is required to move the cuff of the ski boot forward while the lower shell is stationary; typically retained by the binding. This number can be anything from 50 or 60 to 130+. There is no standard for this number across the ski boot industry and the ‘Flex Index’ is not based on any metric like newton-meters, foot-pounds, or Pascals. Even within within any given manufacture’s line-up, a boot with a Flex Index of 110 might not be the same as another boot with the same rating. The main thing to remember is that the higher the number, the stiffer the boot. The Flex Index should only be used as just one general factor in choosing a ski boot.
Your style of skiing, experience, level of skiing, terrain, use, height, mass, and personal preference all play a role in helping you pick the stiffness of your boot. A World Cup racer or an advanced/expert skier that prefers making precision turns at high speeds requiring techniques using a lot of tip pressure might need a stiffer boot. On the other hand, someone who hits the slopes every weekend with her family or Patrols three days a week might prefer a more moderate flex.

Last

‘Last’ is a metric that describes the width of your foot at its widest point, which is typically at the forefoot or the ball of your foot. This will be represented in millimeters: i.e: 102mm. This is a critical consideration, because going up a size in a boot will move the widest part of the boot forward while the widest part of your foot will be kept rearward. As you can gather, going up a size is not an option.

Biofit CM

Roxa’s proprietary ‘Biofit CM’ last provides premolded relief in the most common fit “issue” areas: ankle, navicular, 1st metatarsal, and the ‘6th toe’. Boots with the Biofit Shell can also be molded in most conventional boot ovens to provide additional volume up to 2mm.

*For a comprehensive explanation on ski boot fitment, please visit the link below:
Ski Boot Fitting

Alpine

Our Alpine ski boots are designed for maximum control and performance for downhill alpine skiing. These boots will be not be optimal for touring/skinning as the cuff is typically fixed, keeping you in a natural ski position. These boots are designed to work with any Alpine DIN binding. Alpine DIN bindings must be installed, adjusted, and function tested by a certified binding technician.

*If you’re unsure if your boots and bindings are compatible, please have a qualified technician give them a tactile and visual inspection.

0 stars based on 0 reviews

Add your review